thermal insulation: Heat insulation material is applied to minimize heat loss.

​

outer protection sheath: Protects the insulation and internal structure of the hose against mechanical damage.

​

connector: It is equipped with a connecting cable of the length required by the system to be used. It may have a connector attached or an open tip (without connector).

​

Lid: Hard and soft cap types with ends heated hoses are designed and manufactured for the transfer of certain hot melt substances and gases. It keeps the temperature constant at the desired values between the melter and the application head.

​

PTFE pressure hoseThey are strong hoses that can operate up to 250 °C with high chemical and low friction resistance. It ensures safe transfer of products heated up to 500 bar pressure suitable for the application purpose.

​

Record: Connection fittings that can operate under high pressure are attached at both ends of the hose.

​

Resistance cable:It is equipped with a resistance cable that is resistant to high heat and humidity. It is produced by calculating the power values that will meet the needs of the system.

​

Sensor:The heated hose is equipped with a thermocouple or sensor. It transmits the required temperature value to the temperature controller on the system.

​

Signal cables:Cables from the drive or spray gun are carried along the hose to the melter inlet connector.